Installation Instructions – FinOak

RESULTS

FinOak- Technical specifications

Top finish

Available in a viriety of surface treatments an finishes some which include UV lacquered, UV oiled, Smoked, Fumed, Antiqued or unfinished

Top Surface

2mm wire brushed European Oak Rustic top face

Core Material

7mm Core

Bottom Surface

1mm Pine balancing layer

Thickness

10m

Length of plank

1220

Width

192

Installation method

Valinge click (Glueless installation)

Warranty

25 Years Limited residential warranty

Flooring Composition

The diagram below displays the Flooring composition of the various types of floors that are available.
comp_fin

UV Lacquered floors

Maintenance of UV lacquered floors

The Woodline Parquetry UV lacquer coating is scratch resistant and easy to maintain.

Doormats inside and outside entrances prevent dirt and grit that cause unnecessary wear to the floor.

Protective pads on furniture and chairs will assist in avoiding marks and scratches on the surface of the floor.

Normal cleaning
Use a broom to sweep or vacuum cleaner to prevent dirt, dust or grit from scratching or dulling the surface.

When necessary, the floor can be cleaned with a damp (well-wrung) cloth. Add a few drops of a mild detergent to water. Never splash water on a wooden floor!

Spills or spots must be wiped up immediately with a damp cloth.
Spots must be removed as soon as possible with a mild detergent.

Repairing
A scratch or crack in the floor can be repaired with putty. A deep scratch can be puttied several times if left to dry between applications.

All Woodline Parquetry flooring can be sanded several times. This should only be done by a professional.

UV Oiled floors

Maintenance of UV Oiled Wood floors

Oil treated floors offer you a very special finish and create a beautiful and natural living environment. In order to maintain the beauty of your oil finished floor, it is especially necessary to care correctly for the floor right after installation. With the right care, the oiled floor will become increasingly easy to clean and more hard wearing.

Doormats inside and outside entrances prevent dirt and grit that cause unnecessary wear to the floor.

Protective pads on furniture and chairs will assist in avoiding marks and scratches on the surface of the floor.

After installation care
Woodline Parquetry UV-oiled flooring is pre-finished with UV-oil from the factory and is ready for use in
both domestic and commercial areas. We recommend to clean the floor immediately after installation, with soap.

Normal cleaning
For daily cleaning, sweep or vacuum. For dustier floors, clean with a well wrung damp cloth regularly. When cleaning oiled floors, soap is added to the water (1/8 ltr soap into 5 ltr lukewarm water).
The soap has two functions: it cleans the floor and at the same time forms a protective soap film on the floor making the surface more resistant.

Tips
Always work with two buckets of water – one with soap water and one with clean water for rinsing the mop or cloth.

If you use a special cleaning or care product (water based wax agent) for oiled floors, please test the product on a small, less visible area of the room. Some products may not be compatible with the oil finish.

Whenever applying cleaning and care products to your floor, always ensure no standing water is left behind. This can damage your flooring (swelling).

Maintenance Oil
After a certain period of use, the oiled floor may look slightly worn and matt. Maintenance oil may be used. This should be done by a professional.

Maintenance of UV lacquered floors

SFC Certification- finfloor