BACK TO PRODUCT

Inovar Floor laminate flooring can be used and installed as a DIY product. Although we strongly recommend using a professional to make sure your subfloors and installation method are adequate to keep your warranty in order. Every box has the installation instructions on the back of the box. If you would like to view the instructions online please view instructions or download them as a pdf.

RESULTS

AGT Natura Line Collection – Technical Specifications

Top Surface

Melamine impregnated decorative film. Protected by anti abrasive overlay.

Core Material

H.D.F. (High Density Conifer Fibreboard) with wax treated tongue for greater water/moisture resistance. Average core density 850/900 kg/m³.)

Bottom Surface

Balancing film.

Thickness

8mm.

Length

1200mm.

Width

191mm.

Fit for use Grading

AC4/W32 – EN 13329 +A

Installation method

Unilin L2C locking system (Glueless installation)

Warranty

15 years domestic 5 years General commercial use.

Inovar Floor products conform to EN-13329 performance standards

Highly Stain Resistant

– Covered under a SOLID Direct Manufacturer’s Warranty Inovar Floor and Finfloor products have a sealed surface, which ensures that dust and dirt simply can’t penetrate or cling on stubbornly. That’s why it’s hygienic, easy to maintain and kind to people with allergies – all for the good of your health! Furthermore, cleaning detergents are practically a thing of the past as the floor cleans well with just plain water and a damp microfibre cloth / mop. That is good news for the environment and good news for your shopping bill!

Highly Wear Resistant

– Covered under a SOLID Direct Manufacturer’s Warranty Inovar Floor and Finfloor products have a wear-resistant layer on the surface specifically engineered to protect it from being easily-scratched, thus, making it a longer-lasting product, compared to other types of floor covering materials.

Fade Resistant

– Covered under a SOLID Direct Manufacturer’s Warranty All of our design layers (the layer in the flooring surface that shows the wood pattern) are produced with imported raw material from Europe and US. They are produced under stringent quality control measures according to global industry standards.

Superior Water Resistant Core

– Less than 8% Thickness Swelling rate But just being tough is not enough. The core of Inovar Floor and Finfloor products is made of hardwood fibres with very good water resistant properties. The result – a tough floor covering material which is very water resistant. So, when you are looking for the best in laminate flooring, choose Inovar Floor or Finfloor, because the advantage is clear.

TEST METHODS

Test

Standard

Short Test Description

Behavior to impact load

EN 13329

IC 2 – height of fall 1700 MM is the maximum height without damage (1750 MM Height)

Behavior to abrasion

EN 438

4000 Revolutions

Behavior to scratching

EN 438

3,5

Stain Resistance

EN 13329

Rating 5 (no effect).

Porosity

Graphite test 1

Grade 1 (Pore-free).

Light fastness/UV resistance

EN ISO105

Level 6 – Blue wool standard (No discolouration) Note: Changes are measured against Blue scale.

Resistant to glowing cigarette Ash

EN 13389

Class 4

Formaldehyde emission

EN17-1/ EN14041:2004

Measured in permissible P.P.M. emission. Approved and test at quality E 1.

Waste disposal

N/A

Residual materials disposable with domestic waste. No Toxic fumes released during thermal disposal.

Fire classification

EN13501-1/EN14041:2004

Flame-retardant – B1.

Smoke Development

0 – Norm B3800/1

Class Q1 – Low smoke development (Austrian Institute for floor covering)

Smoke development

0 – Norm B3800/1

Class Q1 – Low smoke development (Austrian Institute for floor covering).

Indentation test

DIN 51955

Residual indentation 0.0 mm (I.B.A – Koblenz).

Chair castor test

EN425

No negative changes when using soft wheel castors Type W (I.B.A. Koblenz)

Susceptibility to Cracking

EN 438-2.26

No cracks observable. Specimen is subjected to large temperature change.

Simulated pushing of Furniture leg

EN 424

No visible damage

Thickness swelling test

EN 13329

12% swelling

Density

EN323

850-900kg/ m³

Static locking strength (Joint strength)

ISO 24334

590 KG/LM

Flooring Composition AGT - Natura Line

The diagram below displays the Flooring composition of the various types of floors that are available.
Inovar laminate flooring composition

Maintenance as Easy as 1,2,3!

Due to the composition and construction of the product, as well as the extremely hard-wearing and non-toxic aluminum oxide protection layer on the surface, trouble-free cleaning and maintenance is well within reach.

General daily maintenance only requires sweeping or vacuuming to remove any loose dirt. Use a damp mop with plain water to clean. Avoid excessive amounts of water. If a spill occurs, soak up the liquid promptly. Floor polish or wax are unable to penetrate the surface of the floor and are not recommended.

Stubborn stains like grease, tar, mud, shoe or nail polish etc can be spot cleaned with Finfloor special cleaning agents. While Inovar Floor is highly fade-resistant, stain-resistant, impact-resistant, burn-resistant as well as very scratch- resistant, it is still possible that you may end up with an unintentional scratch when some extremely sharp or very heavy furniture is accidentally dragged across. For peace of mind, please use felt pads on the legs of furniture to prevent such incidents.

Frequently accessed areas/entrances should be protected with a suitable doormat (of sufficient size) to keep away coarse dirt, grit and stones. Furniture legs should be protected by felt pads or plastic caps. When moving heavy furniture lift it and do not drag it across the floor. Put UV filter/sheer/curtain/blinds on windows in areas where there is direct exposure to sunlight.